Peaty’s Holeshot Tubeless Puncture Plugger Kit Black

When you ride tubeless, you need to be prepared for every eventuality. There are some holes you just can’t fix with tubeless sealant – the classic is a pinch flat puncture or “snake bite” where the soft tyre is pinched between the edge of the hard rim and a much harder rock. With the Peaty’s Holeshot Tubeless Plugger you can rescue your ride and save a long walk back to the car!

Key Features

• Quick and easy to insert tyre plugs. With Peaty’s unique single-sided fork design, you simply push and roll the plug into the hook of the fork.
• With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn’t widen the size of the – hole already there.
• Fork made from 316 stainless steel
• Body made from anodised 6061 aluminium.
• Knurled body and ribbed lid / handle for extra grip.
• Weather sealing o-rings make the tool waterproof when assembled.
• Each kit comes with one sheet of 3×1.5mm and one sheet of 3x3mm plugs.

Made from high-quality 316 stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn’t widen the size of the hole already there.

Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn’t have any issues gripping the tool, even in the muddiest of conditions.

This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.